Our Value of Professional Dishwasher Installation by a Plumber

Our Value of Professional Dishwasher Installation by a Plumber

Blog Article

Schedule Today

From hauling a dishwashing machine right into your home to affixing the water links, mounting a dishwashing machine can occupy to five hours. It might take also much longer if you do not have the right tools. To make your life simpler and also to stay clear of mounting a dishwasher incorrectly, we recommend hiring a professional plumber. A plumber will have the right tools available as well as can install your new dish washer in under 2 hrs. Keep reviewing to find out why you must hire a plumber if you're not fairly convinced yet.

A Plumber Can Examine the Supply Lines

A supply line, particularly a dish washer adapter, attaches the dishwasher to a water source. If you buy a new supply line, a plumber can guarantee that the line is compatible with both your dishwasher and water source. A specialist plumber can check it to make sure that it's in great problem and also does not have any kind of leaks if you decide to make use of an existing supply line.

An Improper Installment Can Invalidate the Dishwasher's Warranty

Prior to mounting a dish washer on your own, you should review the service warranty thoroughly. Unless you are handy and also have experience installing dish washers, you should hire a plumber so you don't risk your guarantee.

Installing a Dishwashing Machine Requires a Variety of Tools

You may need to make a trip to Lowe's or Residence Depot if you do not have a selection of tools on hand. To mount a dishwashing machine, you need the adhering to devices: pliers, an adjustable wrench, a collection of screwdrivers, a tube cutter, and also hole saws. You will certainly additionally require cleansing materials such as a superficial bucket as well as sponge. If you do not have any one of these items, the expense to acquire them can add up swiftly.

Not Installing Your Dishwashing Machine Correctly Can Bring About a Hill of Issues

Not only can mounting a dish washer properly invalidate your guarantee, yet it can likewise create a mess. As an example, if you do not install the supply line properly, you can handle leakages-- or even worse, a flood. You might likewise experience a "water hammer"-- when the water runs as well promptly through your pipes as well as triggers loud drinking noises. If you inaccurately mount your dishwasher to the garbage disposal, you may notice poignant smells or have deposit on your meals.

A Plumber Can End Up the Task Affordably and also Rapidly

You do not wish to obtain stuck washing your meals by hand. A plumber can mount your dishwashing machine in one to 2 hours. Likewise, the ordinary plumber won't charge greater than a couple of hundred dollars to mount your dish washer. Why risk your guarantee and also possibly have to get a brand-new dish washer? Take the safe as well as simple course by working with a plumber.
From transporting a dishwashing machine into your house to affixing the water links, setting up a dishwasher can take up to 5 hours. To make your life easier and also to prevent installing a dish washer incorrectly, we advise employing a specialist plumber. A plumber will have the right devices on hand and can mount your new dishwashing machine in under 2 hrs. A supply line, especially a dishwashing machine port, links the dishwasher to a water source. Unless you are handy and have experience mounting dish washers, you need to employ a plumber so you do not risk your warranty.

How To Install A Dishwasher

Installing A Dishwasher Yourself

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

Steps Involved In Dishwasher Installation

Step One: Gather the Necessary Supplies

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

A screwdriver

• A hose clamp

• Duct tape (optional)

• A brass fitting

• Teflon tape

• A pair of pliers

• An adjustable wrench

• A drill

• Braided steel water line

• A pair of rubber hand gloves (optional)

• Wire nuts

Step Two: Take Safety Measures

First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

Step Three: Remove the Old Dishwasher

This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

Skip this step if you are having a dishwasher installed for the first time in your kitchen.

Step Four: Install the New Dishwasher

Connect the Water Supply

Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

Attach the Drain Line

Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

Slide the Dishwasher into Place

Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

https://www.movementplumbing.com/blog/how-to-install-a-dishwasher

Call Today

Report this page